DaFish Posted November 15, 2006 Report Posted November 15, 2006 (edited) my axle is loose you can grab it and move it from side to side not much but a lil bit probbly about a 64th of an inch. is this bad normal or what and can you let me know how to fix it thanks. and i can move my rotor around. Edited November 15, 2006 by DaFish Quote
smokin 2 stroke Posted November 15, 2006 Report Posted November 15, 2006 have u checked ur LOCK NUTS Quote
kubiac3 Posted November 15, 2006 Report Posted November 15, 2006 If it moves side to side its your locknuts probably. If it moves up and down its your bearings. Easy to replace. Buy a rear axle bearing kit. Hammer out the old onces. Pack the new ones with good greese and put em in the carrier, pack the seals with grease, put them on. put the axle on. Go ride. Quote
DaFish Posted November 15, 2006 Author Report Posted November 15, 2006 (edited) have u checked ur LOCK NUTS how would i do that just tighten them up some more? and are they left handed threads? and what size are the nuts? Edited November 15, 2006 by DaFish Quote
JET 99 Posted November 15, 2006 Report Posted November 15, 2006 stock i think is 32mm not left handed thread........ might try some blue loctite (med strength) they also make an activator for loctite speeds up curing time and also preps surface for a good bond....... red is high strength usually takes heat to break loose........... :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.