Skid plates for Banshee

[06BansheeSE]

I wanted to buy some Skid Plates for the shee and i decided to go with the prm's. On their website they have different sizes, is there a major difference in the sizes or should i just go with the .190, are the other ones just bigger and cover more of the bottom or whats the deal? Thank you in advance!

[racer]

its material thickness. .190 ~3/16ths while .250 is 1/4"

[KlotzBanshee]

If you're talking about swingarm skid plates?

 

Then the diff between the bigger ones is that they protect the dog-bone (link) aswell as the rest of the rear end, the smaller ones only cover the rear axel housing, sprocket, rotor, ect...but are lighter.

 

The .190 is the material thickness used. Smaller numbers (.125) are thinner and lighter, and a higher (.190) number is thicker offering better protection but at the cost of having heavier weight.

[Animalman294]

You might ask around about who makes good plates, because some companies don't cover everything you want protected...................... :beer:

[blak banshee]

If you're talking about swingarm skid plates?

 

Then the diff between the bigger ones is that they protect the dog-bone (link) aswell as the rest of the rear end, the smaller ones only cover the rear axel housing, sprocket, rotor, ect...but are lighter.

 

The .190 is the material thickness used. Smaller numbers (.125) are thinner and lighter, and a higher (.190) number is thicker offering better protection but at the cost of having heavier weight.

which ones cover the dog bone cause it looks like mine is taking a beating. thanks

[06BansheeSE]

Thank you for the responses all!