DaFish Posted September 15, 2006 Report Posted September 15, 2006 i just got a Noss Machine cool head with 21cc domes and v-force 3 reeds with half inch spacers. If someone can help me a guide me to the right jetting it would be greatly appreciated. thank you. Mods: T5's, Noss Machine 21cc, K&N pods, V-force 3's, Bored 40 over Elve: sea level to 600 ft, glamis in the winter temp is 70-90 Jetting now is 300 mains 27.5 pilots and needle on the 3rd clip. thanks alot, matt Quote
okbeast Posted September 15, 2006 Report Posted September 15, 2006 I'd say for the amount of air you're moving through maybe a 310-330 main jet. Quote
dajogejr Posted September 15, 2006 Report Posted September 15, 2006 I'd wouldn't use the spacers...you really only need them with aftermarket carbs to clear the clutch arm...other than the "bling" factor... I'd agree...somewheres in the 330ish range. Quote
DaFish Posted September 15, 2006 Author Report Posted September 15, 2006 do i need to move the needle or the pilot? Quote
dajogejr Posted September 15, 2006 Report Posted September 15, 2006 one step up (which...is what you have) on the pilots is fine. You may or may not have to lean the needle one clip (clip towards the blunt end)...with those VForce Reeds. Sometimes you do, sometimes you don't. Ride it...if it feels boggy or rich in the middle, lean out the needle once clip... Quote
locogato11283 Posted September 16, 2006 Report Posted September 16, 2006 so what are u changing? just the head and reeds? id say maybe one main size at most..try the 310 and see how it runs... Quote
DaFish Posted September 16, 2006 Author Report Posted September 16, 2006 so what are u changing? just the head and reeds? id say maybe one main size at most..try the 310 and see how it runs... ya, that all im changing motor wise. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.