Jump to content

Recommended Posts

Posted

Ok I already run 50/50 mix(92/110) but I'm not sure what cc domes. I only ride a sea level and I would prefer to keep running mix rather than straight race gas but if I have to I would. I bought my bike used supposebly the head was shaved and been ported but I'm not sure, haven't had it apart. I checked the compression awhile back and it was only around 115 or so but I had one of my dads old compression testers and I don't think it had the right adapter(to short). I have +4 timing now should I run 19's or 20's?

 

I ride exclusively at the Oregon coast for any of you Oregon guys that wanna help a brother out,lol. Any help would be great.

 

Thanks Geoff

Posted

You could easily do 19cc domes on 110/92 50% mix. I wouldn't recommend getting to crazy with the compression untill you know if the crank has been welded through, 20 cc domes are considered reasonable on a stock crank, 19 are starting to push it, especially if your cylinders are ported and you are making a fair amount of HP over stock.

Posted

You really need to get a better compression reading, even for shaved head and port work, I think 110 psi is a little on the low side. I thought stock banshee's run like 135psi, and if yours dropped below 100 you had problems.............check again :beer:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...