mccustomize Posted August 25, 2006 Report Posted August 25, 2006 (edited) Parting out an 01 banshee, mostly stock stuff, has airbrushed plastic, frame painted HOK blue mini flake with a clear title, aggresive dune port cylinders 250R is a complete bike, starts and runs, parting it out as well. Let me know what you need [email protected] Edited September 14, 2006 by mccustomize Quote
WALLACE84 Posted August 26, 2006 Report Posted August 26, 2006 How much for the countershaft outta the shee? Quote
LiftdT4R Posted August 26, 2006 Report Posted August 26, 2006 (edited) location? I need a banshee frame. would also be inetested in the entire 250r, if you were close. Edited August 26, 2006 by LiftdT4R Quote
mccustomize Posted August 28, 2006 Author Report Posted August 28, 2006 question 1 I'm not going to break down the motor, sorry, motor goes as a whole bottom end. question 2 I'm in texas so it's quite a ways from jersey question 3 no cool head but I have a polished and worked ALBA head and a milled stock head. Quote
lvnalolife Posted August 28, 2006 Report Posted August 28, 2006 How bout a voltage regulator and/or tail light assembly? I also am looking for some stock headlights. Quote
mccustomize Posted August 29, 2006 Author Report Posted August 29, 2006 20 for the voltage reg and 25 for the tail light assembly Quote
87sheerips Posted August 29, 2006 Report Posted August 29, 2006 Parting out an 01 banshee, mostly stock stuff, has airbrushed plastic, frame painted HOK blue mini flake with a clear title, aggresive dune port cylinders 250R is a complete bike, starts and runs, parting it out as well. Let me know what you need [email protected] I need a cheap stator. Shoot me a PM Quote
mccustomize Posted August 31, 2006 Author Report Posted August 31, 2006 sorry, I'm not even taking the sidecovers off the bottom end, motor goes as a whole I need a cheap stator. Shoot me a PM Quote
DriverDoyle Posted August 31, 2006 Report Posted August 31, 2006 Im in Oklahoma..How much for the Hole 250r Quote
walk72 Posted August 31, 2006 Report Posted August 31, 2006 pics of the plastics, and what carbs do you have Quote
baddsheee Posted August 31, 2006 Report Posted August 31, 2006 How much for each of the heads? Do you know how much the stock head is milled off, or mainly interested if I can still run pump gas on it? Quote
mccustomize Posted August 31, 2006 Author Report Posted August 31, 2006 the only thing the R is missing is the rear plastic and seat, otherwise it's all there and does start. I'll take $900 bucks for the whole thing. I'm about 2 and a half hours from dallas. I'll get some pics of the plastics tommorow and I have some polished 35mm mikunis, and the stock carbs. the head will run on pump gas, the stock head has a small ridge in it, seemed to run great on my bike. I'll take 30 bucks for it and the ALBA head is worked and polished, for pump gas I'll take a $100 for it. Quote
JTQuad Posted August 31, 2006 Report Posted August 31, 2006 how much for the R motor? Shipped to 12726 - JT Quote
mccustomize Posted September 6, 2006 Author Report Posted September 6, 2006 the R might be sold as a whole, I will know by this weekend, also I need an email for pics of the plastics Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.