Bansheeslut03 Posted August 3, 2006 Report Posted August 3, 2006 what would be better to get the arms or the axle for better handleing? Quote
PhilMoore Posted August 3, 2006 Report Posted August 3, 2006 (edited) what would be better to get the arms or the axle for better handleing? Arms. If you have stock rear wheels, you can flip them (valve stem toward the hub) around and get a couple inches wider in back. Edited August 3, 2006 by PhilMoore Quote
Animalman294 Posted August 3, 2006 Report Posted August 3, 2006 I've read where people have done that on back, but the front wont allow you to get to the valve stems. So I would go with the +2 arms and flip the rears like stated above and see how you like it......... :beer: Quote
racer Posted August 4, 2006 Report Posted August 4, 2006 Why not on the front just put the valve stem in backwards and put a new one on the other side you could have it all done in under 30 minutes. and still flip the rears. how you gonna break down them tires? its a pain in the ass and i use a hydraulic tire machine. Quote
txblueshee Posted August 4, 2006 Report Posted August 4, 2006 Why not on the front just put the valve stem in backwards and put a new one on the other side you could have it all done in under 30 minutes. and still flip the rears. Flipping your front rims is about the worst idea ever... Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.