spunmonkey Posted July 23, 2006 Report Posted July 23, 2006 Well today i finally got my bike running. I wasnt getting spark before so i took the ignition coils off and cleaned them and sanded all my grounds down to shiny bare metal, then put new 7mm wire in my new ngk plug boots trying to eliminate stuff. Then i also decided to take another wire and run it directly from my cdi to the cyclinder head studs to make another ground connection instead of using the motor to the frame and the cdi to the frame. After putting it all together and kicking til my foot hurt i looked at the wires from my two coils around the flywheel and wonder why i had the right cdi going to the stator coil that was closest to the front and vice versa for the other side. So i switched them and first kick it came to life. So basically my dumbass had the wrong coil going to the wrong cdi the whole time. unbelievable. Well i am happy and now tomorrow i can put it all back together again and ride. Quote
bansheeseat$$ Posted July 23, 2006 Report Posted July 23, 2006 I'm gald to see you got your 'shee runing and I bet you know more about it now then you did before your self inflicted concern. :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.