mouse Posted July 15, 2006 Report Posted July 15, 2006 i bought a box of parts and there is a set of 36 mill carbs in it and was woundering if they would be to big for the set up i have right now i have a set of 34 pj but i sent them in to on-dunes performanc to get dialed in for my set up. the reason i was ask is i dont think ill have my carbs back by july 30 for the DS days at sliver lake sand dunes. Quote
blueshee03 Posted July 15, 2006 Report Posted July 15, 2006 i bought a box of parts and there is a set of 36 mill carbs in it and was woundering if they would be to big for the set up i have right now i have a set of 34 pj but i sent them in to on-dunes performanc to get dialed in for my set up. the reason i was ask is i dont think ill have my carbs back by july 30 for the DS days at sliver lake sand dunes. mostly it depends on your porting ,how well you get them jetted and such.it will probally run with the 36's but i doubt you'll have the reponse and pull that you have with the 34's.the bigger you go on your carbs the more it takes from your lowend torque.bigger carbs can however help out on topend.just my 2 cents Quote
hittintrees srh Posted July 15, 2006 Report Posted July 15, 2006 when i got my 36mm. lectrons, i notice a HUGE improvment right away!!!!!!! i did loose a bit on bottom, but for me, the added top end pull was well worth the loss. I guess it all depends on how and where you ride Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.