dawarriorman Posted July 7, 2006 Report Posted July 7, 2006 I know OMF makes them, but I can't find anyone on the web that lists them. Anyone know where to get them, or how much they run? Hit a couple rocks yesterday, and put a couple good dents in the wheels. Managed to hammer them out, but I don't feel like doing it again. :: Quote
cdwood37 Posted July 7, 2006 Report Posted July 7, 2006 I don't know where to get them at but i know how to do it. Have been doing it for a hile now for the local guys that have the same problem i just cut a piece of aluminum out and weld it in and i know lots of performance shops do it but don't know where to buy at. Quote
dawarriorman Posted July 7, 2006 Author Report Posted July 7, 2006 I don't know where to get them at but i know how to do it. Have been doing it for a hile now for the local guys that have the same problem i just cut a piece of aluminum out and weld it in and i know lots of performance shops do it but don't know where to buy at. While that is possible, thats just more pain in the ass than its worth. I don't have the equipment available to make it look good (as good as I want it), and I don't want it to look ghetto. OMFs rings look good, and are already made. Quote
Bansh88 Posted July 7, 2006 Report Posted July 7, 2006 A shop out here in San Diego installs them for like $20 a wheel. Some friends of mine have gotten them. Quote
differentstrokes Posted July 8, 2006 Report Posted July 8, 2006 OMF will sell them to you direct and install them on aftermarket rims, but not stock since they have a rolled edge. If they do install inner and outer rings it will cost you out the a$$. You're better off buying them already done from OMF or get some T-9 bajas, which I've bent too. If you do decide to buy just the rings and have them installed locally, check with JL ATV PRODUCTS because they sell rings cheaper than OMF. They also carry Douglas red label reinforced wheels with their rings installed. T-9 bajas are still the cheapest option. JMO Jared Quote
brock_fuzzy_69 Posted July 8, 2006 Report Posted July 8, 2006 a member on here used to sell them for 10 bucks a wheel nto sure if he still does or is still around Quote
dawarriorman Posted July 8, 2006 Author Report Posted July 8, 2006 (edited) OMF will sell them to you direct and install them on aftermarket rims, but not stock since they have a rolled edge. If they do install inner and outer rings it will cost you out the a$$. You're better off buying them already done from OMF or get some T-9 bajas, which I've bent too. If you do decide to buy just the rings and have them installed locally, check with JL ATV PRODUCTS because they sell rings cheaper than OMF. They also carry Douglas red label reinforced wheels with their rings installed. T-9 bajas are still the cheapest option. JMO Jared I already have T9s (picture), and know a guy that can weld them in for me, all I need is the rings. Ill try JL, thanks Edited July 8, 2006 by dawarriorman Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.