Help me spend my money

[Samdogmx]

Ok I have about $2000 to spend but cant make up my mind what i wana do. The current mods are in the sig. I DONT want a full on drag bike. I want to be able to play around & jump stuff. So dont say i need a drag frame & struts or anything.

I dont think i want to get anything more than a +4 swinger

 

I was kinda thinking or either doing a 4mil crank with some ported stock cylinders, seems like there are alot of used cyl/piston setups on planetsand.

 

or should i just go all out with a 4mil & cub cylinders?

either way I want to get some better pipes & intakes & carbs. I just dont know if I can swing the carbs & pipes & still be under $2k.

 

or should i just stick with the stock stroke & get some porting dune porting done on my current setup?

 

I dont know give me your opinions guys.

[blueshee03]

call 918-232-3950 and talk to jim,he can fix you up.or pm passionre on here.

[batoutofshell]

You should send me your cash then you won't have to worry about it anymore. I will spend it!!Problem solved!!!

[shanYE west]

call 918-232-3950 and talk to jim,he can fix you up.or pm passionre on here.

522392[/snapback]

 

I agree. Jim can point you in the right direction.

[Rustbag]

I'd keep the stock stroke, get some cub cylinders with the 68mm bore, 35mm carbs and some good pipes like shearers.

[EastCoast Banshee]

Well whats more important to you handeling or speed? You could get a good suspension setup and still have enough left over for a good port and carbs.. Its really up to you but in my oppion if you spend most your time in the dunes get a set of cubs.

[jankab]

I'd keep the stock stroke, get some cub cylinders with the 68mm bore, 35mm carbs and some good pipes like shearers.

I agree

[mnduner]

how about a second shee? then you build one for play and one for speed

[Samdogmx]

yeah now im thinking about just getting a stock stroke cub. that would definatly be less work than a 4mil crank.