Jump to content

FINALLY GOT IT BACK TOGETHER BUT...


Recommended Posts

After a year I finally got my shee back together and Tried to start it for the first time yest. As soon as I turn the fuel on and the bowls filled up. one of the air drain tubes from the left side carb started draining fuel. Its the one that goes to the bottom of the bowl.

The carbs are 33PWK

Besides removing and cleaning again can anyone think of a reason why this would happen?

Link to comment
Share on other sites

Take the carbs off, remove the bowl, and flip the carb upside down. The bottom of the float should be level, or just above level...

That's close enough...

 

You might want to remove the float, (small dowel pin) and remove the needle and seat and blow some air through there...to make sure there is no dirt stuck.

Either improper float level, dirty needle and seat...or sunken float will cause gas to pour out the overflow tube. Sunken or bad floats are pretty rare now a days....

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...