Putting it all back together.

[JArmShee]

Putting the Shee back together tonight

The woodruff key broke off last year and marked up the crank groove pretty good. a year later Im putting everythign back together.

Heres the stupid "Q"

Is there a way I can make sure the key will stay in place. especially since its surfaces are not 100%

Edited May 17, 2006 by JArmShee

[Toybreaker]

Get some 400 grit or finer lapping compound. Very lightly coat the round side of the key with the paste and slip it into the groove. Wipe up any excess without moving the key. Shouldn't move then.

[JArmShee]

Thanks ToyBreaker

And not to Question your Knowledge

But has anyone else tried this method?

[i12gofast]

Id use about 2 cc's of homemade babybatter , should keep it sticky like your girls hair.