PC CASES

[crazyrotts]

IF I WANTED TO PC THE CASES DO THEY NEED TO BE SPLIT? I KNOW THERE ARE SEALS AND BEARINGS INSIDE BUT I FIGURE THEY MUST BE ABLE TO TAKE HEAT. BUT I DONT KNOW HOW MUCH. I'VE READ ABOUT PC AND IT SEEMS LIKE THE DIFFERENT BRANDS HAVE DIFFERENT TEMPS. AND BAKE TIMES.

[DIRTMAN350]

IMO i would split the cases and removed all the gears and seals then have them pc.

[Wallrat]

So lets say you don't split em and get the pc done. A year from now you wipe your crank and need to replace it. You're going to have to chisel your way into those cases. Dunno if you noticed but PC is pretty hard and covers up cracks and imperfections well - even the ones that are intentional.

[sheefreak]

Gut them!

[NYUK]

yes they need to be split,it 1 st involves sand blasting,would you want sand somewhere in your cases?

 

 

these cases were pc`ed black like the pipes.there was sand and powder all over the inside. it took a few thourough washes with gas soap and water to get it all out.

[Justintoxicated]

yes they need to be split,it 1 st involves sand blasting,would you want sand somewhere in your cases?

 

 

these cases were pc`ed black like the pipes.there was sand and powder all over the inside. it took a few thourough washes with gas soap and water to get it all out.

510831[/snapback]

 

 

Those Cases look real good, makes me want to do mine black as well! last time I cleaned mine with nitro blast for RC cars, that shit works great.