shanYE west Posted April 24, 2006 Report Posted April 24, 2006 I have Pyramid valves and I took my banshee apart to get some new motor work and noticed that my reeds are bad.. Would this cause a lean or rich condition in my jetting? Quote
00tbanshee Posted April 24, 2006 Report Posted April 24, 2006 I have Pyramid valves and I took my banshee apart to get some new motor work and noticed that my reeds are bad.. Would this cause a lean or rich condition in my jetting? 507035[/snapback] i have seen cracked reeds they will make it run rich your not burning the fuel Quote
Yaxy Posted April 24, 2006 Report Posted April 24, 2006 (edited) I had reeds that went bad and the bike ran really rich. The reads were abuot 4 yrs old, not cracked and sat as they should on the reed cages. The reeds were just worn to the point they were not firm enough. Chris Edited April 24, 2006 by Chris Yax Quote
Wallrat Posted April 25, 2006 Report Posted April 25, 2006 My air filter was dripping with gas...so would that be rich? Quote
Yaxy Posted April 25, 2006 Report Posted April 25, 2006 If the filter was completely saturated with gas it acts a sponge, not allowing proper air flow. I would say this is a problem. Clean, reinstall and see what happens. Chris Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.