glamisrat Posted April 21, 2006 Report Posted April 21, 2006 I have a 4 Mil. stroker built last season,been out on many trips and ran fine. On a trip to Glamis last weekend it was pushing oil out of the trany vent.It does not apear to be foamingthe oil lookk clear and clean.Itt is sevear enough that it cuold not be road very long without adding oil. Any ideas what could be causing this? Quote
greg_banshee Posted April 21, 2006 Report Posted April 21, 2006 i'm pretty sure there are 2 vents (one at the side & one at the back) and they have to be connected with a "T" connector (mine are anyways) mine are connected up by my Cylinder head. when they weren't connected i had the cam problem. Quote
g-force Posted April 21, 2006 Report Posted April 21, 2006 (edited) I have a 4 Mil. stroker built last season,been out on many trips and ran fine. On a trip to Glamis last weekend it was pushing oil out of the trany vent.It does not apear to be foamingthe oil lookk clear and clean.Itt is sevear enough that it cuold not be road very long without adding oil. Edited April 21, 2006 by g-force Quote
Ben350 Posted April 22, 2006 Report Posted April 22, 2006 When my crank seal went it sucked oil and burned it in right cylinder. Never pushed oil out. Not saying it couldn't I agree that it's either a hose routing problem or it's overfilled Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.