clutch problems

[msprouse]

I just bought a 98 shee and the clutch lever just moves freely no tension at all the lever the cable connects to moves when you pull the lever but there is no tension and no clutch please help.

[watkins]

#1 buy a clymers manual

#2 have you tried adjusting the clutch lever on the bars?

 

You may need to pull the clutch cover and inspect the clutch, but first I would make sure you are adjusted correctly at the clutch lever.

[msprouse]

I tried udjusting the cable with no luck so I pulled the cover and found thst one of the clutches was way out of wack so I loosened the bolts over the springs and straightened it out. now I can't get the damn clutches to slide back on to the splines, the basket goes over and all the way back but the clutches won't go on all the way. I notices there are some washers inside the basket that are just wabbling around, could this be why thay are not lining up?

[batoutofshell]

if they are rubber get rid of them and put your clutch back together and try to adjust if that doesn't work get a new cable its stretched that is what i did same problem

[msprouse]

IU got it all back together and I got pressure in the handle but now when I put in gear nothing happens it's like it stuck in nuetral please help

[rsheppick]

check your pm

[msprouse]

I heard something about soaking the new clutches what does this mean