2 into 1 alky carb

[kawiking]

thinking about 2 into 1 carb, this bikes for drag racing only. stock cycl. shaved head, a port and polish to come. im wanting to run a 2: 1 carb hopefully on alky.

what size carb will i need to do this?? yes i'll lose some low end torque , but i'll gear for that.im trying to make a 300 ft drag bike ,stock frame ,stock head(shaved .30).

im going for a sleeper look!! i just hate messing with 2 carbs, 4 stroke spoiled me.

i'd like to run alky, so any .02 would be great!!! thanks

[watkins]

You have it backwards, you will GAIN low end with a 2-in-1 and you will LOSE top end.

 

If you are building a drag bike then you should stick with dual carbs.

 

My .02 cents.

[bansheeseat$$]

You have it backwards, you will GAIN low end with a 2-in-1 and you will LOSE top end.

 

If you are building a drag bike then you should stick with dual carbs.

 

My .02 cents.

500210[/snapback]

I second that .02