kluke1983 Posted March 27, 2006 Report Posted March 27, 2006 Allright guys i know this will prolly be a dumb questions. But i changed out my clutches went and rode it up and down the road andyway the clutch fluid was milky shit so i pulled it back apart and the o-ring was still on the nipple any ideas for me. Have any had this prob i guess the oring could be worn on or where it inserts or something any ideas would be helpfull i only get to go home one day to fix it before i go to rattlesnake hunt. kluke out Quote
kluke1983 Posted March 28, 2006 Author Report Posted March 28, 2006 Um the spout or tube or whatever that comes from the case to the clutch side case it transfers the coolant from the jugs to the water impeller. It is above the clutch pack itself and in front of it. There is actually a hole for it in the gasket. Maybe that will be more clear. Quote
locogato11283 Posted March 28, 2006 Report Posted March 28, 2006 u have coolant leaking somewhere. maybe its the water pump seal?? if that oring is good its more than likely the water pump seal. Quote
kluke1983 Posted March 28, 2006 Author Report Posted March 28, 2006 I dont have the bike infront of me and I will be explaining to my dad since i am 4 hours away will just have to time pretty much to just get the bike how do you replace the seal on the water pump seal thanks guys. Quote
racer Posted March 28, 2006 Report Posted March 28, 2006 just search on here. its been covered a bunch of times. once you find a thread that suits your needs email the hyperlink to your dad and BAM! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.