nutcase Posted March 26, 2006 Report Posted March 26, 2006 I bought lonestar a arms off of ebay.They are the +2 +1. When i went to put them on i noticed that the bottom of the hubs are kicked out as far as they will go and the tops are kicked in as far as they will go.What am i doing wrong here.The top a arms are lick 3 inches shorter than the bottoms.Do i have to get different balljoints with longer threads to correct this? Quote
txblueshee Posted March 26, 2006 Report Posted March 26, 2006 You want to dial iin your caster/camber with someone close to your weight sitting on the bike... I can't remember the excact numbers for the adjustments... I know there on the forum somewhere though.... Mike Quote
wesw Posted March 26, 2006 Report Posted March 26, 2006 use a lever to get them some what close trust me its a major bitch that and tie rods Quote
thack Posted May 10, 2006 Report Posted May 10, 2006 (edited) lsr recomends these settings caster positive camber negative motocross 4.5 degrees 4.5 degrees cross country 4.5 degrees 4.5 degrees sand dunning 3 -4.5 degrees 2-4 degrees recreational3.5-4.5 degrees 1-3 degrees desert racing6.5 degrees 2-4 degrees tt racing 3-4 gegrees 1 degrees caster left side camber right colum Edited May 10, 2006 by thack Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.