most documented HP....

[Mullet Man]

this is just for my own information. so dont flame about dynos and HP #'s and all that jazz, i iam well aware how they work, what they are for and why etc.

 

just curious what are the limits of the shee's power WITHOUT overboring, stroker crank or nitrous.? looking for max power potential info from bolton stuff without miachine work being involved or drag pipes (inframes only).

[odaen]

bolt on only....no porting etc.......

 

with gas, probably around 50HP from bolt-ons

 

(pipes, cool head with smaller dome volume, timing advance, reeds, air filter)

[sheefreak]

bolt on only....no porting etc.......

 

with gas, probably around 50HP from bolt-ons

 

(pipes, cool head with smaller dome volume, timing advance, reeds, air filter)

491576[/snapback]

 

I would agree.

[ellison445]

Right on

 

bolt on only....no porting etc.......

 

with gas, probably around 50HP from bolt-ons

 

(pipes, cool head with smaller dome volume, timing advance, reeds, air filter)

491576[/snapback]

[Tim C]

Cheetah Cubs can be a bolt on and can easily get 70hp without a stroker crank.

 

Heres a link to a 350 Cub on making 93hp w/gas

 

http://www.planetsand.com/ubbthreads/showf...0/page/1#402196

[odaen]

that had some "machining" done to it to get 93HP

 

But, yeah, didn't even think about the cub cylinder as a bolt on, and I have one.

[.]

stock is about 37 hp

 

pipes are a modest 10

 

cool head with domes 2

 

reed cages another 2

 

carbs ....... 2

 

timing probably about 3 with a bunch of the other mods done

 

air filter another 2

 

All said and done with a bunch of tweaking and such you should be able to get at least 60 out of the engine (accounting for using cpi's when they hit their hp numbers) I know my LRD's are 9 across the rpm band and a peak of 16 above stock.