RIPPEN Posted February 23, 2006 Report Posted February 23, 2006 (edited) I somehow managed to misplace one of the castle nuts for my spindals I looked at Ace Hardware but they didn't have one with the right thread pitch. Is this something Iam gonna have to go though th dealer for? Thanks... RIPPEN Edited February 23, 2006 by RIPPEN Quote
[email protected] Posted February 23, 2006 Report Posted February 23, 2006 (edited) i order the bolts i cant find at hardware stores from the www.rivayamaha.com parts finder dealers a good 20 minute drive each way for me bumper to bumper traffic Edited February 23, 2006 by [email protected] Quote
[email protected] Posted February 23, 2006 Report Posted February 23, 2006 u only need one for the spindle ? the big outside nut i got tons extra =-D just pay actuall shipping and its ures Quote
RIPPEN Posted February 23, 2006 Author Report Posted February 23, 2006 u only need one for the spindle ? the big outside nut i got tons extra =-D just pay actuall shipping and its ures 477543[/snapback] If I have to order one in I may take you up on that RIPPEN Quote
Shee-Male Posted February 23, 2006 Report Posted February 23, 2006 I think shipping would be more than a new one, check your local bike/atv shops, I'm sure its the same one used on many quads, someone will have one laying around Quote
[email protected] Posted February 23, 2006 Report Posted February 23, 2006 If I have to order one in I may take you up on that RIPPEN 477554[/snapback] let me know bud shoot me a pm Quote
MILO Posted February 23, 2006 Report Posted February 23, 2006 sometimes i'll get stock stuff from ronnies.com front wheel nut is like $3.87, rear nut is $4.81. any yammy dealer could hook you up for the same amount without shipping though, and probably a little quicker. hell, they probably even have some laying around. Quote
RIPPEN Posted February 23, 2006 Author Report Posted February 23, 2006 sometimes i'll get stock stuff from ronnies.com front wheel nut is like $3.87, rear nut is $4.81. any yammy dealer could hook you up for the same amount without shipping though, and probably a little quicker. hell, they probably even have some laying around. 477594[/snapback] Right on Ill have to check.. I usually try to keep the dealer as a last resort but this is small enough I shouldn't get ripped off to bad Thanks guys RIPPEN Quote
[email protected] Posted February 23, 2006 Report Posted February 23, 2006 around 5 bucks rippen and i can send you 2 , ill ship them out and tell u shipping and you can pay the actual cost , i coud care less about hooking a fellow bhq'er up with bolts i just dont want to loose money , i got boxes n boxes of parts laying around . Quote
BigRed350x Posted February 23, 2006 Report Posted February 23, 2006 Maybe you shouldn't lose parts. At least I found the ball bearing that works the clutch that I lost whe I tore my engine down. It fell into my oil pan that was below the desk. You should have seen my hands after I went digging around in my oil pan trying to find it. Quote
MILO Posted February 24, 2006 Report Posted February 24, 2006 Maybe you shouldn't lose parts. At least I found the ball bearing that works the clutch that I lost whe I tore my engine down. It fell into my oil pan that was below the desk. You should have seen my hands after I went digging around in my oil pan trying to find it. 477693[/snapback] been there, done that Quote
MILO Posted February 24, 2006 Report Posted February 24, 2006 (edited) i coud care less about hooking a fellow bhq'er up with bolts i just dont want to loose money Edited February 24, 2006 by MILO Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.