fast500#12 Posted February 20, 2006 Report Posted February 20, 2006 (edited) that's jetting not getting. ok here goes, all my mods are in my signature. it ran great in the oregon coast over christmas. 32.5 pilot needle second clip frome the top 320 mains air screw two turns out. now i am at 4300 ft and its 40 degrees. i have good spark 170 psi compression both sides. i dropped the pilot to 30's and the mains to 310's. the plugs are wet with gas . it started for about 20 secs and then bogged out and died twice and now won't start at all. i a really frustrated any help would be appreciated. Edited February 20, 2006 by fast500#12 Quote
wesw Posted February 20, 2006 Report Posted February 20, 2006 try a 27.5 pilot, 4th clip on the needle, some 310 mains. and go from there it sounds like you fouled the plugs. Quote
akita8 Posted February 21, 2006 Report Posted February 21, 2006 Make sure tou put the carb slides in correctly. Quote
fast500#12 Posted February 21, 2006 Author Report Posted February 21, 2006 they are and the float bowls on the right sides and the choke tube is conected, the reeds are brand new. the plugs are new. all the obvious stuff is the way it's supposed to be Quote
wesw Posted February 21, 2006 Report Posted February 21, 2006 have you put new plugs in and checked for spark. Quote
fast500#12 Posted February 22, 2006 Author Report Posted February 22, 2006 i have nice hot spark first thing checked. i haven't had time to swap my jets out and give it a try yet may be tomarrow. Quote
fast500#12 Posted March 29, 2006 Author Report Posted March 29, 2006 it was the procom cdi. i shit canned it and got a stocker off ebay and she fired 2nd kick. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.