Ducman Posted January 29, 2006 Report Posted January 29, 2006 I searched and looked in the clymers and could not find the info. Can someone give me the thickness of a stock/OEM cylinder base gasket (not the head gasket). I think it is .012" or .010" and I'm not sure which one. Thanks in advance. Quote
blueshee03 Posted January 29, 2006 Report Posted January 29, 2006 i'm pretty sure the stock gaskets are .015 thickness. Quote
Ducman Posted January 30, 2006 Author Report Posted January 30, 2006 I just measured the one that came off my +4mm motor and it was .030". I didn't build the motor so I wasn't sure what was in it. I had a pretty tight squish about .030 before my rebuild so I want to be sure to order another .030 gasket and I wasn't sure what stock was. Thanks Quote
RATBIKE0130 Posted January 30, 2006 Report Posted January 30, 2006 About .030 new unused about .020 used. Quote
BlazinOne Posted January 30, 2006 Report Posted January 30, 2006 The base gaskets that come with moose and vesrah kits are around .020-.030.The gaskets that come in wiseco packaging are .012-.015.I believe they are made by cometic. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.