Jump to content

Recommended Posts

Posted

Ok I should have my Sherer Inframes pretty soon and need to order jets.

The only other mod beside the pipes will be clamp on K&N's

 

I was told to start with 300 main's, 27.5 pilot and clip about in the middle.

Does this sound pretty good?

 

My main question is, ho wmuch of a range will the jets come in? 300-350? will I only get 1 set of pilots? When I oder jets do i just tell them I need 300 main and 27.5 pilot or what?

 

Sorry I have never bought jets before... :cheers:

Posted

I would start rich and work down. I'd start w/ 350 mains, I would order some 330's as well along w/ the 27.5 pilot....I'd start w/ the stock pilots at first and see how it starts and idles...if it starts hard, then put the 27.5 pilots in...readjust..then try the 350 mains and do a wot test...if it won't rev up , then drop to the 330's. If it does rev out, then run it in 6th gear for 5-10 seconds and pull the plugs immediately after the run...black tip is rich, brown is perfect, tan is lean...you might want to play w/ the needle height to get better response and low end power...

Posted

so do I just oder the jet "kit" or should I just buy them individually? I just wanna make sure the right jets and needles will be in the "kit"

i forgot to add that im around 500ft or so.

 

Thanks :cheers:

Posted

You can order jets from dennis kirk or magic racing.

I thing magic only has them up to 320 and dennis kirk has them up to

400? Its cheaper buying them than getting one of those expensive dynojet kits.

Some people here swear by the dynojet kit though. :confused:

:cheers:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...