chewdizzle13 Posted January 22, 2006 Report Posted January 22, 2006 What year did they first add the oil injector on the blaster? And is it easy to block it off and just use pre-mix? Thanx Quote
Robert Posted January 22, 2006 Report Posted January 22, 2006 they make a block off kit for it, I dont know where to get one, but im sure you could find it anywhere that sells aftermarket blaster parts Quote
holeshotkid Posted January 22, 2006 Report Posted January 22, 2006 Blasters have always been oil injected. You don't need to waste your money on a block off kit. Just remove the clutch cover and pop off the e-clip that holds the oil pump drive gear on. Remove the drive gear and pin and replace the cover. The oil pump itself will act as the block off plate. Remove the oil injection line at the carb and cap off the port. Mix you up some premix and your good to go. Quote
locogato11283 Posted January 22, 2006 Report Posted January 22, 2006 wish i my banshee had oil injection, i hate pre mixing!! hell u can prolly just drain the oil out and start using pre mix cant u? the gear just wont be pushin any oil right? Quote
holeshotkid Posted January 22, 2006 Report Posted January 22, 2006 I suppose that would work for a while. I suspect it wouldn't take long before the pump locks up without any lube running through it though.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.