Speedie Posted January 21, 2006 Report Posted January 21, 2006 Can anyone tell me what brand timing plate this is? It has 10 degrees either way. Another question. I look like it set on 0 or .05 degress advance is this right? What do you guys think? Quote
2003LimitedBanshee Posted January 21, 2006 Report Posted January 21, 2006 I would have to say it looks like a Ricky Stator plate. It is cast just like Ricky's, but I guess it could be another brand, but most others are made from billet aluminum (why, it doesn't show, and it's not a stress load item). It looks like it is set around 1 degree advance. Quote
FIRST BANSHEE Posted January 21, 2006 Report Posted January 21, 2006 not sure about the plate, but it looks like 1 degree advance. also I would replace the stator cover gasket, and make sure the wire grommet it not leaking. you have alot of corrision in there. Quote
Speedie Posted January 21, 2006 Author Report Posted January 21, 2006 not sure about the plate, but it looks like 1 degree advance.also I would replace the stator cover gasket, and make sure the wire grommet it not leaking. you have alot of corrision in there. 462564[/snapback] I had water in it from may last ride also. It is leaking. Thanks for the guys for the answers. Quote
Polish Posted January 22, 2006 Report Posted January 22, 2006 keep a close eye on those Bolts.........a lot of rust can week'n them......and then you have a big.. .......good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.