Jump to content

Recommended Posts

Posted

Might go up to Sand Mountain thanks giving and its gonna be my first time on a banshee up there i usually do MX but this guy wants to mess around what do you guys think........

 

This is his Z400-440 cams, pipe, ign, head work, edelbrok carb,nitrous so he put in the e-mail.

 

He said something about people betting $$$ this is the only reason I am asking other wise I could care less and wouldnt waist your guys time on reading this because these questions get asked everyday!

 

My shee

.80 over

Mild port/polish "clean up port job?"

35mm carbs

Power Pro Exhaust

+5 Degrees

Milled Head

 

I know tires and everything else make a big difference and I dont have any yet but just from that should I even reply to him?

Posted (edited)

If you go to the Pics section, and download the second video from my Walden post, I raced a brand new Artic Cat 400. He had K&N filter, Carb, and a pipe. I have the mods in my sig. I kicked his ass bad. I'm not sure about your guy having nitrous though, that might get you. If you can shift fast and drag a lot and are confident, I say go for it. Get yourself some haulers and maybe a bigger port. Some Reeds wouldnt hurt either. Go for some CPI In Frames. lol

Edited by BigRed350x
Posted (edited)

CPI is a drag pipe I dont drag race i usually do trails/MX be kinda pointless to buy new pipes rejet all that other bs just for 1 race.

 

Im not gonna do all that work and $$ lol just for 1 race thats in 2 weeks or so.

Edited by 01bansheefox
Posted

You could beat him depending on rider weight, traction, and rider skills. Is this guy begging you to race him for money? It sounds to me like it's a punk kid with too much money, and the only way to prove he's a man, is to beat you and your banshee.

Posted (edited)

Actually he is 43 and runs the ATV club i just joined lol.

He has already told me other banshees in the club beat him all the time but also said those are the drag banshees that focus just on drag racing.

Edited by 01bansheefox
Posted
Race him and find out :confused:  :confused:  :confused:

437836[/snapback]

thats what i would do but something doesnt sound right if he raced banshees and they beat him why does he want to race for money id watch him drag someone else first see the way he rides and then go kick his ass

Posted

Well duh i could race him to find out im not that stupid my point is being because other people claim Z400's are nothing compared to a banshee but he has NOS does it really improve that much?

Posted

yes...

hard to tell with your mods..reguardless of what everyone on this sight says..those bikes are quick and if set up right can be fast as hell..go race and check back..let us know what happened :headbang:

Posted

There are some built z-400's like he describes that are typically comparable to a piped YFZ 450, not sure what the N2O might do for it. If your talking sand mountain NV, then you'll want to run a smaller than stock front sprocket (13T) so you can pull a strong 4th or possibly 5th up the drag hill. If your geared too high you'll bog when trying to shift into the next gear. Its not about the fastest acceleration, its who can pull the most gear up the looooong comp hill slope. When I ran there the first time with my 4mm motor I had one guy on a banshee that could beat me due to his setup was perfect for the long drag hill ( he ran a 12T front and could pull 5th gear up the hill, just slightly faster than my 4th which I couldn't pull real strong) l even though I'm sure I was making at least 10-15+ more HP, but my setup was still stock. If I would have had a 13T like I do now for the sand I could have pulled 5th and smoked him.

Posted

Hmmm? Based on the mods listed, and the fact that I have a fast 440 Kawi, and a fast Banshee. I'm thinking he'll beat you with the juice.

Your carbs seem too big for your mods. But maybe I'm wrong. Your best bet IMO would be 13/ 41s or 42s pulling 4th gear with 22" 8 paddle buffs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...