04BansheeLE Posted November 15, 2005 Report Posted November 15, 2005 I have a 04 with full fatty system and snorkel off...I had a 240 in for mains and bike ran great the whole time....now I went to a 270 main to see how that did and it idles great and top end is WAY better, however mid range blows now. If it not reved way up it bogges horribly, I am not sure where my clip is but should I have had to change it putting in new mains? also any ideas why it would be bogging now? and which way should I move my clip if you think thats it? Thanks! Quote
biggun6ss Posted November 17, 2005 Report Posted November 17, 2005 To lean out your mid range you need to move your needle clip up towards the blunt end. That will allow the needle to fall further down. With the needle further down, less gas will flow. You might want to try going to a smaller main, maybe a 260 or 250 before moving the needle. Quote
FIRST BANSHEE Posted November 17, 2005 Report Posted November 17, 2005 If your running great on top and idles good I would move the clip up to lean the middle out. good luck Quote
wesw Posted November 18, 2005 Report Posted November 18, 2005 try raising your needle 4th clip most bike like it. it could be a lean bog your bike should want the fuel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.