sanddragon2004 Posted October 12, 2005 Report Posted October 12, 2005 4130 CHROMOLY ARMS SUPER LIGHT WEIGHT AVAILABLE IN STOCK GEOMETRY, AND ALSO MINUS -2 AND +2FORWARD! all billet tie rods with heim jointed rod ends. Everything comes powdercoated, with urethane bushings! I will have the spindles that go along wtih them in a few days. as well. 299.99 for everything you see here!!!!! got em in stock, what color do you want? chrome 149.99 more! we have them for the yfz 450, banshee, 250r, and 450r. ready to ship call today! 408-833-4131 Quote
race-a-holic Posted October 17, 2005 Report Posted October 17, 2005 (edited) Compared to stock,how much of a weight loss(for the banshee not me,LOL)can I expect?What type of spindles do you have?How much?Needing to lose a few pounds on the banshee.Also,are these drag only or will they hold up under normal riding conditions.I know no jumping,just if I run over a small bump or whoop will they hold up?Thanks. Edited October 17, 2005 by race-a-holic Quote
sanddragon2004 Posted October 18, 2005 Author Report Posted October 18, 2005 For all 4 arms, complete with heims looking at between 5-7lbs including the heim joints. we have spindles that screw directly into the heims they weigh about .75lbs each the whole kit with spindles and arms and tie rods looking at 449.99 i dont recall what a stock set of arms weighs but figure quite a bit compared to these at 5-7lbs I would also suggest these be used on a bike that you either ride to the hill, or to the drags, but i would prob not due any heavy aggressive duni8ng with them. they are designed to be ridden through the woops of glamis and pismo, or where every your drag racing. Quote
race-a-holic Posted October 18, 2005 Report Posted October 18, 2005 Are these spindles for hubs or the type that bolts directly to the wheel?Sorry if the wording is wrong.What colors are available for the a-arms?Got pictures of the spindles? Quote
race-a-holic Posted October 18, 2005 Report Posted October 18, 2005 Asking because I don't know the answer.What type of shock are they designed for?The -2 and +2.Please explain.Thanks. Quote
sanddragon2004 Posted October 18, 2005 Author Report Posted October 18, 2005 we have them either for stock wheel hubs, or for spindle mount wheels. they are setup for stock shocks. or you can run them with marvin shaws. they are also available in -2" wide, and +2 forward for drag racing. narrow front end. does that answer your question? if not feel free to call and ask as many as you like 408 833 4131 Quote
race-a-holic Posted October 18, 2005 Report Posted October 18, 2005 Thanks for the replies.I think I might have found a used set of drag a-arms.If that deal doesn't work,sounds like you have a very good deal.Might be getting back in contact with you.Again,Thanks.Just wanted to let you know what's going on. Quote
sanddragon2004 Posted October 19, 2005 Author Report Posted October 19, 2005 Not a problem race a holic. Keep your eyes peeled guys we might be having a christmas special on all our stuff around tky day. Quote
race-a-holic Posted October 21, 2005 Report Posted October 21, 2005 I did buy the used set I found.Would like to thank you for answering my questions though.Again,thank you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.