Big Bad Banshee Posted September 27, 2005 Report Share Posted September 27, 2005 I'm looking for some cylinders, stock bore and port would be best. Will take bored cylinders but no ported. I have a bunch of diffrent parts for trade t5's +2+1 a arms round style swing arms and tons of other parts, let me know Quote Link to comment Share on other sites More sharing options...
braxton Posted September 27, 2005 Report Share Posted September 27, 2005 I'm looking for some cylinders, stock bore and port would be best. Will take bored cylinders but no ported.I have a bunch of diffrent parts for trade t5's +2+1 a arms round style swing arms and tons of other parts, let me know 419981[/snapback] HAVE A SET OF 0.20 OVER BORE STOCK PORTED CYLINDER AND NEW PISTONS AND STOCK HEAD WITH ABOUT 3 HOURS ON THEM $200 SHIPPED Quote Link to comment Share on other sites More sharing options...
sheefreak Posted September 27, 2005 Report Share Posted September 27, 2005 Have a stock bore stock port set of cylinders off a 99, just tore down cause compression was low, probably needs to go up as this was the second set of pistons ran through the stock bore, but never any breakage on either set. I am interested in round style swingarm, what lengths do you have, and what about a carrier? Quote Link to comment Share on other sites More sharing options...
sheefreak Posted September 28, 2005 Report Share Posted September 28, 2005 Hello? Quote Link to comment Share on other sites More sharing options...
bad boyz cycles Posted October 1, 2005 Report Share Posted October 1, 2005 are the cylinders still avaliable Quote Link to comment Share on other sites More sharing options...
fast87 Posted October 18, 2005 Report Share Posted October 18, 2005 i got a set of .020" over cylinders for sale, need to be bored to most lilely .030" over to get the scratches out(ring broke but no deep scratches), also a new prolite top end kit with .020" pistons and gaskets, includes a stock head that has 2 weekends on it, no porting at all, LMK what you wanna pay for this and i will just sell the jugs and just sell the piston kit if needed, Thanks and i'm interested in a +4 or +2 roundhouse swingarm and carrier, or the extended a-arms ~Mark~ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.