anybody have cylinders to trade

[Big Bad Banshee]

I'm looking for some cylinders, stock bore and port would be best. Will take bored cylinders but no ported.

I have a bunch of diffrent parts for trade

t5's

+2+1 a arms

round style swing arms

and tons of other parts, let me know

[braxton]

I'm looking for some cylinders, stock bore and port would be best. Will take bored cylinders but no ported.

I have a bunch of diffrent parts for trade

t5's

+2+1 a arms

round style swing arms

and tons of other parts, let me know

419981[/snapback]

HAVE A SET OF 0.20 OVER BORE STOCK PORTED CYLINDER AND NEW PISTONS AND STOCK HEAD WITH ABOUT 3 HOURS ON THEM $200 SHIPPED

[sheefreak]

Have a stock bore stock port set of cylinders off a 99, just tore down cause compression was low, probably needs to go up as this was the second set of pistons ran through the stock bore, but never any breakage on either set.

 

I am interested in round style swingarm, what lengths do you have, and what about a carrier?

[sheefreak]

Hello?

[bad boyz cycles]

are the cylinders still avaliable

[fast87]

i got a set of .020" over cylinders for sale, need to be bored to most lilely .030" over to get the scratches out(ring broke but no deep scratches), also a new prolite top end kit with .020" pistons and gaskets, includes a stock head that has 2 weekends on it, no porting at all, LMK what you wanna pay for this and i will just sell the jugs and just sell the piston kit if needed, Thanks and i'm interested in a +4 or +2 roundhouse swingarm and carrier, or the extended a-arms

 

~Mark~