cheezehead69 Posted September 26, 2005 Report Posted September 26, 2005 i have a 99 banshee and i resently replaced one of the carb tops. i reset everything back up and it wont start unless i pull start or use something like carb cleaner to get it going. once it is going you can drive it fine but it wont stay running at idle. does anyone hav any ideas what this could be because i am stumpped. thanks. Quote
Blackmon Posted September 26, 2005 Report Posted September 26, 2005 do you still have tors or has it already been removed? Quote
cheezehead69 Posted September 26, 2005 Author Report Posted September 26, 2005 what do they look like. they probably are still on there the bike is stock Quote
Dinner Posted September 27, 2005 Report Posted September 27, 2005 (edited) Make sure your main pilot screws are still in, i had my left carb's pilot screw fall out, wouldnt idle...found it in the foot peg, and put it back in and it idles fine Edited September 27, 2005 by Dinner Quote
Blackmon Posted September 27, 2005 Report Posted September 27, 2005 (edited) if you still have your tors on you will have a box thing on top of your carb top if not you will just have a cable coming out of your carb top going straight to your throttle Edited September 27, 2005 by Blackmon Quote
tsufilmz Posted September 27, 2005 Report Posted September 27, 2005 your choke tube have a hole or crack? Quote
cheezehead69 Posted September 27, 2005 Author Report Posted September 27, 2005 i found the problem my choke tube was the slitest bit off. you couldent see it you had to get in there and play with it to see. thanks for all your help. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.