crayola Posted September 23, 2005 Report Posted September 23, 2005 hello im new on these. i change the pipe, air filter, main jet (280), and twis thortel control, i take all electric parts of the bike start on the frist kick and have the correct idle rmp stay on all the time, but when i give some gas i have the problem is like get to much gas and i tray to run and moves very slow like is rich on gas or like is the choke on, on the frist gear just move like 5 mph i just tuch the gas and go's up like a little bit but just a little bit then stay on the same rmp but whit to much gas, thanks for any advice!!!!! Quote
PUSH THE THROTTLE Posted September 23, 2005 Report Posted September 23, 2005 (edited) Welcome to the HQ. Are you having your problem at 1/4, 1/4-3/4, or at full throttle? It sounds like it's a jetting issue to me. Can you list your mods specifically example air filter: K&N Pipes: T5's... Are you running the stock carbs? Also where are you from? Now that I re-read it do you have your Tors disconnected? It sounds like you tried to. Make sure the little black box that is under the left side of the fuel tank is disconnected. Edited September 23, 2005 by PUSH THE THROTTLE Quote
locogato11283 Posted September 23, 2005 Report Posted September 23, 2005 yea, we need to know more info..also if you can try to make sentences and make sure you spell words half ass right so we know what you are saying... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.