Roll Design

[rebelbanshee2]

I just got a set of Roll Design arms for cheap for my 250r. THey need new lower spherical bearings and potentially new upper heims. I know Roll will charge way much for these, so Im trying to find them cheaper from an actual manufactuer. I havnt had much luck finding any info so far so was wondering if anyone here had any info. thanks!

[JKJK]

Check out the K+k website.They have a section dedicated to replacement aftermarket a arm parts.

[MonkeyBoy]

Besides, I have heard from some that have done this that roll is not as expensive as they thought.

 

It's not like rebuilding a Laeger ProTrax.

[rebelbanshee2]

yeah I called them up a while ago and it wasnt too bad. Although I have since discovered that these arms are for a LOBO 250R frame and are worthless to me....any one got a lobo frame with no arms?

[MonkeyBoy]

I wish... I did get a chance to ride one once.... Heaven.

[sandbomb]

lower bearings are a com12T , you can get them thru anybody whi deals F.K or rod end supply [ 913-768-1017] they cost about $18.00

[rebelbanshee2]

now thats what I was looking for!

[lonestar]

I would highly reccommend getting the replacement parts from Roll. They may be a little more expensive but there is a reason for that. The Spherical joints and the heims are teflon lined and high strength and unless you know the P/N of each one you won't find them anywhere else. Roll specially buys these parts from the manuf and they are not easy to come by. Just give them a call and see what they have to say before you go on a wild goose chase.

 

Oh by the way if you do call them ask for Bo and I am sure he will be more than happy to help.

426245[/snapback]

What he said