Dead Op Posted August 16, 2005 Report Posted August 16, 2005 Ok I was riding my banshee last Sunday, all of a sudden the rubber boot cracked where the boost bottle was, so I replaced it but along the way I threw in a set of Boyeson Rad Valves.... The mods are boost bottle -rad valves-fmf fatties-knn filter- Any ways the thing sat for a week cuz the parts had to come in. So I go to start it and after about 10 times i said somthin is wrong, I FORGOT TO PUT THE PLUGS ALL THE WAY IN! so i put them in and kiked the shit out of it, wouldnt start....I put a little premix in both cylinders and it came to life but it reved sooo high i shut it off cuz i got scared....Kicked it again statred but it was revin at like 10000 RPM's so i shut it off. Can anyone tell me where to start at with this? I need it running before thursday PLEASE! Quote
joshv5.0 Posted August 16, 2005 Report Posted August 16, 2005 this may sound stupid but is the gas on? Quote
Dead Op Posted August 16, 2005 Author Report Posted August 16, 2005 OK I FEEL LIKE A FUCKIN ASSHOLE!!! I WENT BACK INTO MY SHOP AND LOOKED AT THE PEACOCK AND THE GAS WAS OFF!!!!!!!!!! THANKS FOR REMINDIN ME IT HAS BEEN A LONG DAY!!! Quote
Cotton eyed Joe Posted August 16, 2005 Report Posted August 16, 2005 OK I FEEL LIKE A FUCKIN ASSHOLE!!! I WENT BACK INTO MY SHOP AND LOOKED AT THE PEACOCK AND THE GAS WAS OFF!!!!!!!!!! THANKS FOR REMINDIN ME IT HAS BEEN A LONG DAY!!! 405150[/snapback] LOL Its happened to everyone here I would bet. Quote
FASTOYS Posted August 16, 2005 Report Posted August 16, 2005 Now i have NEVER done that ! jk lmao Sometimes i feel i need one of those stickers "Turn the gas on Dummy" ! Quote
race-a-holic Posted August 16, 2005 Report Posted August 16, 2005 Sure it happens.I've seen guys lose races all because they forgot to turn the gas on. Quote
Dead Op Posted August 16, 2005 Author Report Posted August 16, 2005 Uhh OH! I TURNED THE GAS ON THIS MORNINGF FIRED IT UP AND IT DID THE SAME THING!!WHAT IS WRONG??????? Quote
wayfst Posted August 16, 2005 Report Posted August 16, 2005 pull your slides, make sure they aren't sticking open. Quote
Dead Op Posted August 16, 2005 Author Report Posted August 16, 2005 He fixed it left cylinder carb was sticking wide open. Well at least it runs now...thanks Quote
Toomey Banshee Posted August 16, 2005 Report Posted August 16, 2005 check for any air leaks while your at it. Quote
J-Madd Posted August 16, 2005 Report Posted August 16, 2005 I hope those Boyesen's work well for you! I had to change my needle clip a notch when I had them. Quote
sandman121383 Posted August 17, 2005 Report Posted August 17, 2005 he gave me a call, it was the one slide stuck wide open. u really had to jet for the valves j madd? wow. well glad to hear her runnin good again man. turns out his air screws were both off too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.