sg30721 Posted August 11, 2005 Report Posted August 11, 2005 A few years ago I put a twist throttle on my Banshee and recently I took it off... the twist throttle kit did away with the stock carb tops so I had to add the idle adjustment screw mod to the side of the carb.. now I have the thumb throttle back on... so I had to put the stock carb tops back on... should I be using the idle adjustment screws on the side of the carbs now or the adjustment on the stock carb tops to control my idle? Thanks Quote
kw04 Posted August 11, 2005 Report Posted August 11, 2005 just get the tors eliminator kit and it should be back to the way it was with the twist throttle Quote
Big Blue Posted August 11, 2005 Report Posted August 11, 2005 The adjusters on top of the carbs are for synching you slides. Quote
sg30721 Posted August 12, 2005 Author Report Posted August 12, 2005 Ok.. I just decided to pull the old Motion Pro twist throttle kit out again... it has new carb tops and all... I put the twist back on along with new carb tops and it runs great again.. Guess the problem is in the TORS Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.