What pipe brands will fit RZ conversion?

[Quinlan]

Havin some troubles with the rockets, anyone know if any other brands will fit on?

Thanks

[01bansheefox]

Trouble with the rockets? doesnt it say like on the main page of there web site, it fits RZ with no problems......?

 

I QUOTE!~ " One of the only pipes that will clear the powervalves on an RZ350 motor conversion"

Front page

Edited July 13, 2005 by 01bansheefox

[Quinlan]

Yeah they fit fine, not the problems I am referring to.

[Yaxy]

What kind of problems are you having with the rockets? My RZ was just ported to run Rockets but with all this termoil going on with Rockets I can wait. Either way I also hear that the PTR's will work fine. Other than that I guess you have to dent the other brands of pipes.

 

Chris

[Holyman]

All out frame pipes will work {of course} I heard the OLD OLD FmF's will work, Paul Turners will work Dynaport and Motofast 2:1's will work because they come out the right side. Otherwise you can put a small dent in the pipe to clear.

[broke]

The pipes that have been mentioned above will all work great. PTRs don't have the RPM range to handle an RZ top end well. I used them for about a year, it will be the smoothest a Banshee will ever get. The Rockets work well and clear with no problems. Most pipes can be cut and turned to clear.

rzcolo has Toomey T-3s on his that have been cut to fit. I may have a set of Rockets for sale if I can find out if Shearers will fit.