Brian060 Posted June 19, 2005 Report Posted June 19, 2005 Hey guys, I just got my shee back today and it ran like shit. Took it back to the mechanics house (extremely competant/knoledgable guy) and he said that it seems like the quad is running on1 cylinder. The right cylinder to be specific. Anyway, this guy installed a pro design killswitch for me, and the key still works. I was wondering, since all websites say "In order for kill switch to function on banshee, key switch must be disconnected " Could he have wired it wrong, where the key still works (turns engine off) but only one cylinder is firing? I would appreciatel any and all informative replies. Thanks all, -Brian Quote
locogato11283 Posted June 19, 2005 Report Posted June 19, 2005 ok im kinda lost here. was it running on one cylinder before you took it to him? i dont run keys on any of my banshees and i have no problems with my kill switches. you might as well disconnect the key because if someone wants to steal it a key isnt gonna stop them. the pro design kill switches are a positive action kill switch that connect right to the coil. the one that runs down there should connect into the orange wire. the other is just a ground. check to see if he did that right. Quote
Brian060 Posted June 19, 2005 Author Report Posted June 19, 2005 No loco, it didnt run at all when I brought it to him, we figured out that he spliced the wires wierd, and the left side wasnt getting spark. It was wierd, and its hard to explain, but she runs now. I will be removing the key soon also Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.