devshee14 Posted June 9, 2005 Report Posted June 9, 2005 hey i just bought a 87 banshee which has an 89 rz350 motor in it the electrical from the banshee is stock and i was wondering how i can make the motor work with the banshee electrical? Quote
Ducman Posted June 9, 2005 Report Posted June 9, 2005 I think you need the RZ wiring harness. I'm currently looking into running RZ cylinders and you need the wiring harness, CDI, PV servo, servo controller, and a couple more things just to run the cylinders. Quote
broke Posted June 10, 2005 Report Posted June 10, 2005 I think you need the RZ wiring harness. I'm currently looking into running RZ cylinders and you need the wiring harness, CDI, PV servo, servo controller, and a couple more things just to run the cylinders. 379851[/snapback] Ducman gave you a pretty good head start. Some kind of battery eliminator or battery. You will need the flywheel and stator off an RZ also. The regulkator would pretty much be the only thing left to get after all that. The wiring sucks, but if you take your time, it can be done correctly. Good luck, broke Quote
Yaxy Posted June 10, 2005 Report Posted June 10, 2005 Do a search under my name. I have covered this subject in the last six month and there are several individuals on this site that have tried this. I personally will begin the wiring process within the next few weeks. RZ motor components enroute from Patroit as we speak. It feels like Christmas! Quote
broke Posted June 10, 2005 Report Posted June 10, 2005 Do a search under my name. I have covered this subject in the last six month and there are several individuals on this site that have tried this. I personally will begin the wiring process within the next few weeks. RZ motor components enroute from Patroit as we speak. It feels like Christmas! 379974[/snapback] I know what you mean 12port +4 RZ top end will be on mine very shortly. It's not as hard as I thought it would have been. Quote
Yaxy Posted June 10, 2005 Report Posted June 10, 2005 Sounds awesome broke, I didn't go to that level with the 12 port or 4 mm even though Dan recomended the +4mm. I am pleased that Dan recomends almost to the T the same set up on my current shee so I am confidnet that this RZ will be awesome at least I hope.. The RZ should be around 10 to 15 more horse than my shee. Chris Quote
devshee14 Posted June 12, 2005 Author Report Posted June 12, 2005 alright so i guess im gona have to get the wiring harness but im just wondering what i can keep to use liek the regulator the sparplug coil ?? Quote
Yaxy Posted June 13, 2005 Report Posted June 13, 2005 (edited) From what I have read you are going to need the following: Stator, RZ CDI, RZ Servo motor, RZ Power valve control unit, RZ Voltage regulator? I am not sure, I am assuming the banshee's would work fine? Kill switch, ?? Spark plug coil, ?? I can't remember I wll have to get back to ya Chris Edited June 13, 2005 by Chris Yax Quote
broke Posted June 13, 2005 Report Posted June 13, 2005 From what I have read you are going to need the following: Stator, RZ CDI, RZ Servo motor, RZ Power valve control unit, RZ Voltage regulator? I am not sure, I am assuming the banshee's would work fine? Kill switch, ?? Spark plug coil, ?? I can't remember I wll have to get back to ya Chris 380964[/snapback] Here is the list. Stator RZ Flywheel RZ Servo motor RZ PV controller RZ Regulator RZ (the Banshee one won't work) CDI RZ Battery eliminator or battery Harness RZ Coil EITHER(I use the Banshee's) Kill switch can just be a tether Good luck, if you have any more question, fire away. Quote
devshee14 Posted June 13, 2005 Author Report Posted June 13, 2005 allright well i have the rz motor and the stator and flywheel but im not sure about the servo motor where abouts is it located on the engin? also anyone know were i can get some of these used parts? PV controller RZ Regulator RZ CDI RZ Harness RZ Battery eliminator thanks! Quote
devshee14 Posted June 13, 2005 Author Report Posted June 13, 2005 also i seen this diagram would it work a buddy made it on this forum? Quote
broke Posted June 13, 2005 Report Posted June 13, 2005 allright well i have the rz motor and the stator and flywheel but im not sure about the servo motor where abouts is it located on the engin? also anyone know were i can get some of these used parts? PV controller RZ Regulator RZ CDI RZ Harness RZ Battery eliminator thanks! 381169[/snapback] Ebay! Quote
devshee14 Posted June 14, 2005 Author Report Posted June 14, 2005 have u found that diagram yet? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.