bansheelover Posted June 4, 2005 Report Share Posted June 4, 2005 hey everyone i bought sone hoosier fklat track tires on douglas blue lables from my buddy today he said to bore out the holes a few mil's and they will work fine he said a few of the other racers around here have done it and there is no problem anybody else do this ?? and what do i have to do ?? thanks Matt Quote Link to comment Share on other sites More sharing options...
Bc34c Posted June 4, 2005 Report Share Posted June 4, 2005 if the ex rim is the same as the 250 r(which i think they are) i have done it on 2 sets. I dont remember if the hole needs to go towards the center or away from the center but basically the hole just needs to be about 1/4 bolt size bigger. my friend did it at a machine shop he works at. It also needed a lil notch on inside of center for the lil tab that sticks out on banshee hub. I did the 2 nd set my self with a drill although i wouldnt recomend it on a good set of rims. these were a set of old paddles i found a a garage sale for 20 bucks. Quote Link to comment Share on other sites More sharing options...
brock_fuzzy_69 Posted June 6, 2005 Report Share Posted June 6, 2005 the honda pattern is 110mm and the yamaha is 115mm can drill a second set of holes as well Quote Link to comment Share on other sites More sharing options...
racer Posted June 6, 2005 Report Share Posted June 6, 2005 the honda pattern is 110mmand the yamaha is 115mm can drill a second set of holes as well 378215[/snapback] thats whjat id recommend. just offset them 45* from the other set and voila. you have interchangable tires/wheels. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.