Jdawg82 Posted May 29, 2005 Report Posted May 29, 2005 I bought a compression tester for my banshee and I only have 30 psi on the one cylinder I have to be doing something wrong. What is the proper procedure? Quote
Wallrat Posted May 29, 2005 Report Posted May 29, 2005 (edited) Start the bike and let it warm up. Shut it down and pull the plugs. Screw in the tester till its snug and kick it over with the throttle wide open until it stops going up on the gauge. Repeat on other cyl. Edited May 29, 2005 by Wallrat Quote
Titanium Posted May 30, 2005 Report Posted May 30, 2005 Umm yeah what he said, but remember to Turn off the ignition and fuel before you start kicking. Quote
EMMALVERDE Posted May 30, 2005 Report Posted May 30, 2005 hey i am also looking into buying a compression tester, s was wondering were can i buy them, and how much are they? Quote
fastbanshee4u Posted May 31, 2005 Report Posted May 31, 2005 BUY them at auto parts store.About $30 at auto zone.Not the best tester but will do the job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.