saud alzaabi Posted May 20, 2005 Report Share Posted May 20, 2005 (edited) well im 45 % finished doin my project but before i was going to put the motor back together i saw that there is a problem with my shee's crank the right one is ok it has little free play which all cranks have and so it the left one but the bearing of left crank seems to go left and right i mean there is a space so ? what should i do i dont have any money left i spent it on paints and mods. is it ok if i played the bike like that ? my left rod my right rod Edited May 20, 2005 by saud alzaabi Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 20, 2005 Report Share Posted May 20, 2005 Check the banshee manual or a clymer manual, There is a limited amount of free play allowed (sideways). If the free play is to much then the crank will need to be pressed back in shape. most people then weld the crank to prevent seperation of the crank. Since imagestation has issues here are your pics: LEFT LEFT Right Right Quote Link to comment Share on other sites More sharing options...
saud alzaabi Posted May 21, 2005 Author Report Share Posted May 21, 2005 i dont have the clymers manual i just need help here Quote Link to comment Share on other sites More sharing options...
Rare Scottish Tree Badger Posted May 21, 2005 Report Share Posted May 21, 2005 (edited) Big End Side Clearance ... 0.25 - 0.75mm (0.010" - 0.030"). Rare. Edited May 21, 2005 by Rare Scottish Tree Badger Quote Link to comment Share on other sites More sharing options...
race-a-holic Posted May 23, 2005 Report Share Posted May 23, 2005 While you already have the crank out,I would definitely get it welded.That crank sure looks like it needs some work.Just my opinion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.