Jump to content

Recommended Posts

Posted

heres the deal,the shee was running great one day and then i started it the next and it idled fine, as soon as you give it throttle it just bogs with no load on it at all.i wiggled the plug wires and then it ran fine,for a few minutes.i replaced the boots and cliped the wires back.and same thing happned ran great for a few minutes and then it didnt.i put another coil in and it did the same thing again.WTF!!!could it be a broken reed?the plugs are fine,its getting fuel,air.anyone know the specs for the coil?im going to get it tested but i dont know what it should be putting out.any help will be greatly appriciated.

Posted

the tors unit has been disconected,and i never even thought about the e-brake.are there wires for that.?because that whole system is intact.i will check the stator wires tonight.thanks for the help guys.

Posted
the tors unit has been disconected,and i never even thought about the e-brake.are there wires for that.?because that whole system is intact.i will check the stator wires tonight.thanks for the help guys.

366327[/snapback]

Yea theres a little white plug-in deal on the left side of the radiator, take your tank and radiator plastics off and follow the wire from the clutch perch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...