locogato11283 Posted April 26, 2005 Report Posted April 26, 2005 these are my last setup before i decided to run the cubs. these cylinders have about 10 hours on them. they were run at LS for a few hours and then some test and tune with gearing and tires here at my house. they made 77hp and 43 ft lbs of torque with rockets and 35mm pwk's. that dyno sheet is on the rocket website. the bore is 60 over and have domes that match this setup. the next bore on these will be 80 over using a blaster piston. the domes will have to be reconfigured for the next size piston which any shop can do. id like to sell the cylinders and stuff complete with the PD cool head but will seperate. the cool head will not come with domes as the domes will go with the cylinders. this setup does not use a spacer plate. you must have an aftermarket head for this setup. they run very hard and you would not be disappointed with them, i have just decided that my cubs run a little harder. i want $650 shipped for the cylinders, pistons, rings, wristpins, bearings, clips and domes. ill take $110 shipped for the head. i will do a package deal if someone wants all of it. i am open to offers as well. make me a reasonable one and we will talk. Quote
badassbanshee479 Posted April 29, 2005 Report Posted April 29, 2005 cwuehf 361410[/snapback] who did the porting? what trype of porting is it?? drag. trail, ect.. thanks Quote
locogato11283 Posted April 29, 2005 Author Report Posted April 29, 2005 rick cairo of atchison kansas did the porting. hes pretty well known with a lot of guys that run down at LS in OK. its pretty much a drag port but could be duner as well. its def not a trail port. its got a lot of power that will run with the best of them. Quote
9603banshee Posted May 2, 2005 Report Posted May 2, 2005 (edited) rick cairo of atchison kansas did the porting. hes pretty well known with a lot of guys that run down at LS in OK. its pretty much a drag port but could be duner as well. its def not a trail port. its got a lot of power that will run with the best of them. 362069[/snapback] Rick Cairo is about one of best out there....he definatly knows his sh*t!!! This setup I would say is worth much more than the asking price....Too bad I don't have a bottom end sittin around....Just my 2 cents though Edited May 2, 2005 by 9603banshee Quote
locogato11283 Posted May 2, 2005 Author Report Posted May 2, 2005 Rick Cairo is about one of best out there....he definatly knows his sh*t!!! This setup I would say is worth much more than the asking price....Too bad I don't have a bottom end sittin around....Just my 2 cents though 363104[/snapback] oh yea its for sure worth a lot more than that. if you were having a big name builder do it the porting alone would cost you almost that much. hell this comes with pistons and the domes needed for it. its def a fast setup, just dont need it now that im keepin the cubs. thanks for the good words!! Quote
1BADBANSHEE Posted May 2, 2005 Report Posted May 2, 2005 Could you post some pics of the port work? Thanks. Quote
locogato11283 Posted May 2, 2005 Author Report Posted May 2, 2005 Could you post some pics of the port work?Thanks. 363213[/snapback] i already tried and the pics look like shit. you cant even see in the intakes. you cant really tell anything from the pictures anyway. im emailing you some pictures now tho so u can decide for yourself. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.