bigscary Posted April 18, 2005 Report Posted April 18, 2005 I can ride for about 10 mins and the clutch cable gets slack in it........I can adjust it on the perch and ride for a couple more minutes........at this point I pull the quick change cover off and adjust it in a bit........ride for about 10-15 more mins..........and it is getting old.......... what is wrong with my clutch I can't feel it slipping........and it pulls really hard...... i'm runnin a dirt digger clutch with 3 toomey springs and 3 stock springs......and a direct drive lock up........ the clutch pull on the lever is so light it feels like something is wrong.........LoL......... HELP......... Quote
1800bigk Posted April 18, 2005 Report Posted April 18, 2005 (edited) have you tried a new cable? once it is adjusted correctly down at the pressure plate, there shouldn't be any re-adjustment needed down there. Did you do it by the clymer book step by step Edited April 18, 2005 by 1800bigk Quote
Mr.Giggles Posted April 18, 2005 Report Posted April 18, 2005 Direct drive lock up,does this mean you don't have to line up the arrows on the caseing???? Quote
1800bigk Posted April 18, 2005 Report Posted April 18, 2005 Direct drive lock up,does this mean you don't have to line up the arrows on the caseing???? 357100[/snapback] with direct drive you still have to line up the marks on the case with pointer on the clutch actuator arm, just like normal Quote
bigscary Posted April 19, 2005 Author Report Posted April 19, 2005 with direct drive you still have to line up the marks on the case with pointer on the clutch actuator arm, just like normal 357109[/snapback] correct.........and that is lined up properly........ and no I haven't tried a new cable........I have one ordered......I have one of my mechanics off at school and the other one called in sick today........so as soon as they get caught up....i'll get one of them to look at it........ I just wish I could figure this out on my own......save them some time.......... thanx for the posts folks....... Quote
bigscary Posted April 22, 2005 Author Report Posted April 22, 2005 correct.........and that is lined up properly........and no I haven't tried a new cable........I have one ordered......I have one of my mechanics off at school and the other one called in sick today........so as soon as they get caught up....i'll get one of them to look at it........ I just wish I could figure this out on my own......save them some time.......... thanx for the posts folks....... 357118[/snapback] bump Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.