dead banshee

[quick-z]

Went riding today and everything was going good. I was going up a pit wall and the machine stalled.I got it back down to flat ground and could not get it started.So I had a friend tow me and i tryed to jump start it. It would start but when you let off the gas it would die.And will not start at all by kicking it over.So I loaded it up and brought it home.I did a compression test and I have 125 in one and 20 in the other.Did I lose my top end?.What would cause it to lose compression in that cycilinder?.And if I need to rebuild the top end is it a big job how difficult.Also when I got it started by jumping it it was poping out the pipes.My mods are 02 shee

paul turner power head 22cc domes

paul turner mid range pipes

pyramid reeds

advanced timing +4

Any help we be helpfull Thanks

From; one sad banshee owner

[ssanddemon]

Topend fer sure. It's no big deal to build the top, make sure you have a Clymer's book and dig into it! Takes about 1 to 2 hrs to pull it down, 2 to 3 to put back together (rookie speed); obviously no big thang. Some great package deals on ebay, $250 or so for everything.