c00t3r Posted April 6, 2005 Report Posted April 6, 2005 ok guys heres the deal i decided to get some t5;s i got them for 250 bucks with the silencers good shape no dents ok here are my mods +2 timing key bored stock carbs +2 mm K&N clamp on 6 inch long with outer wares stock porting. what i need to know is what would be a good place to start with jetting what pilot and how many turns on the air screw and what postion for the needle and what size main to start with. i live in northern michigan and the temp here to day was 55 degrees. i want to put the pipes on tomorrow so any help would greatly be apprecated thanks in advance!~ i have pc pipes now and the jetting is 340 mains and the pilot is a 35 i turn out on the air screw and needle 3rd clip down from the top~ how far am i off with what i have? andy F.T.R #311 Quote
mxbanshee Posted April 8, 2005 Report Posted April 8, 2005 (edited) Read this... http://www.bansheehq.com/forums/index.php?showtopic=43303 Edited April 8, 2005 by mxbanshee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.