GYTWYPT Posted March 12, 2005 Report Posted March 12, 2005 Just wondering if anyone knows if you can run a RZ flywheel with a banshee stator. About the onlyl thing i see that looks diffrent is that the 2 pickup tabs on the flywheel are a little longer than my stock banshee ones. thanks Quote
Meat Posted March 12, 2005 Report Posted March 12, 2005 wont work. not sure what the reason is, but they're incompatable. Quote
Holyman Posted March 12, 2005 Report Posted March 12, 2005 I heard it will work but you have to change the timing ALOT of degrees. If you compare the 2, you'll see the pickups are in a differnet location compared to the keyway. Quote
GYTWYPT Posted March 13, 2005 Author Report Posted March 13, 2005 I heard it will work but you have to change the timing ALOT of degrees. If you compare the 2, you'll see the pickups are in a differnet location compared to the keyway. 337972[/snapback] well i compared the 2 the pick ups are centered in the same location in relation to the keyway, but like i said they are just a little longer. Anyway i decided to just go ahead and pull my banshee flywheel and send it, but while it is out i plan on just trying the RZ flywheel on the shee. If anyone is interested let me know and i will post if it works or not. thanks all Quote
Holyman Posted March 13, 2005 Report Posted March 13, 2005 Definitely let us know. Just post it here. Quote
GYTWYPT Posted March 14, 2005 Author Report Posted March 14, 2005 Go for it, it can't hurt to try. 338301[/snapback] Wellllllll. I slapped it on there today and kicked on it for a little bit. It did not seem to like it the +5 advance i had. kinda coughing instead of starting. Fortunaltly i have the easy adjustment on my plate. Just have to loosen a couple allen heads and move the pick up coil. So i figured since the tabs where a little longer i probably had to much advance. So i backed it up to around stock or -1 and it started right up the first kick sounded good. I should have let it be but i wanted to see how far i could go so i got it started up around +2... not bad tried a little more got the pick up coil a little close nicked it a couple times but it kept running, so i adjusted it and now the damn thing wont start for nothin. took the plugs out and they where wet. Didnt have any new ones laying around so i tried to clean them off and stick em back in but still nothing. I hope i just fouled the plugs but i think that is wishful thinking. Not real sure what happend. But anyway it doesnt seem to take much to get a RZ flywheel to work. Just dont need any advance to speek of. Maybe 1 or 2 deg tops. Quote
GYTWYPT Posted March 14, 2005 Author Report Posted March 14, 2005 How easy is it to F up the pick up coil? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.