simonsays Posted March 7, 2005 Report Posted March 7, 2005 is it normal for the clutch to be hard to pull. and also i found when i hold the clutch fully and put it in 1 st gear and reve the engine it moves a bit.... is that normal or is my clutch fucked up? Quote
banshee76179 Posted March 7, 2005 Report Posted March 7, 2005 Cable needs lube and clutch just needs adjusting.... Do, U have a clymers? Quote
simonsays Posted March 7, 2005 Author Report Posted March 7, 2005 what are cylmers? and thanx for the tips Quote
banshee76179 Posted March 7, 2005 Report Posted March 7, 2005 Clymers is the banshee bible..."THE GOOD BOOK" Its like the book for dummies...... They r on ebay for like 20 bucks plus shipping... Quote
bigboybanshee Posted March 7, 2005 Report Posted March 7, 2005 Is your clutch stock or is it aftermarket? If it's stock, then banshee76179 hit the nail on the head. If you have an aftermarket clutch, then your clutch will be harder to pull if the aftermarket clutch springs were installed. As far as it moving forward a little bit, does it do it all the time or just when you first fire it up? If it doesn't do it all the time, then I wouldn't worry about it. Mine will do it too until the banshee is warmed up Quote
wodeman Posted March 9, 2005 Report Posted March 9, 2005 Depending on how old the cable is, replace it with a new one (I prefer the MotionPro Terminator). I thought the problem with my clutch was the heavy duty springs so I went and ordered a EZ pull clutch perch. Still was a hard pull. Put on the new clutch cable and what a difference! Now with the EZ pull perch, the pull on it is easier than my Warrior.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.