Jump to content

Recommended Posts

Posted

Me and my dad have been working on my banshee for about 6 months now. It's got spark and it gets gas into the carbs. But for some reason it isn't getting threw them into the cylinders. We've pulled the carbs off and stuff and set them and all that stuff, but it still doesnt work. We've checked them at least 5 times. The reeds look brand new, the seals are fine, the floats are fine. If you put gas on top where the spark plugs go, it starts up right on first kick. It used to start but then it just stopped out of no where. Anybody know what the problem could be?

Posted

Maybe, ur not getting enough fuel... maybe, u need to bump up ur pilot...

 

Just sounds like ur not getting enough fuel period... maybe ur pilots r clogged...

:confused:

 

 

And welcome to the site!!!!

Posted
Me and my dad have been working on my banshee for about 6 months now. It's got spark and it gets gas into the carbs. But for some reason it isn't getting threw them into the cylinders. We've pulled the carbs off and stuff and set them and all that stuff, but it still doesnt work. We've checked them at least 5 times. The reeds look brand new, the seals are fine, the floats are fine. If you put gas on top where the spark plugs go, it starts up right on first kick. It used to start but then it just stopped out of no where. Anybody know what the problem could be?

333680[/snapback]

Loosen drain screws on bottom of carbs and see if gas comes out . I have seen pilots plugged , petcock pluged, and deris in carb inlet needles. Do you have the rubber tube on between the carbs ,which is for the choke.

Posted

Make sure you are running fresh gas. Then clean the crap out of your carbs with carb cleaner, take the main and pilots out and spray carb cleaner in the jets and the carbs, then take an air compressor hose and blow the hell out of them (if you have a compressor).

Posted

It did start when we put gas in the spark plug thing. We took them out, then put gas in then put them back in. It started and ran for like less than 1 second. And we completely cleaned the carbs just like all of you said. We've cleaned them everytime we took them off. (about 5 times) :(

Posted (edited)

lol. I put my stock carbs back on cause I sold my other set up, an Im waitn for my new setup. But anyway I had the same problem, even had to add gas to the cylinder anit ran until the gas ran out.

So picked the quad up at the nerf until gas pores out the over flows. Let it down an kicked it over fired first kick, did it again today an it fired after pickin it up. Try that, means your floats are adjusted wrong my pilots lean too maybe yours is also. my new shit will be here soon so I aint F-n with it.

Edited by FORMULASPEED
Posted

OMG, I GOT IT RUNNING!!!! I RODE IT TOO! I got into 5th gear, I felt like was gonna get pulled right off of it. The first thing I did was took it up the road, then an SUV came and I had to do it...I totally blew that mother away.... :rotflmao:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...